TotalEnergies Carter EP 150

TotalEnergies Carter EP 150 high-performance mineral oil is specially formulated with extreme pressure (EP) additives for the lubrication and protection of enclosed industrial gears, reducers, and bearings operating under high loads, high temperatures, and heavy-duty service conditions.

TotalEnergies Carter EP 150

Technical characteristics

• Type: Mineral oil for industrial gears with Extreme Pressure (EP) additives.

• Viscosity grade: ISO VG 150.

• Extreme pressure (EP) and anti-wear protection: High load capacity that minimizes wear on gear teeth and bearings subjected to severe mechanical demands.

• Oxidation resistance and thermal stability: Excellent resistance to temperature degradation, preventing the formation of deposits, sludge, and varnish at high operating temperatures.

• Anti-corrosion protection: Provides superior protection against rust, corrosion, and corrosion in steel components and copper alloys (bronze/brass).

• Demulsibility and foam control: Rapid water separation and low tendency to foam formation, ensuring a continuous and uninterrupted lubricating film.

• Seal compatibility: Excellent neutrality with elastomers and seals used in industrial gearboxes.

Classifications, specifications, and approvals

• International specifications (Meets the requirements of):

  • ISO VG 150

  • DIN 51517-3 CLP

  • ISO 12925-1 CKD / CKSMP

  • ISO 6743-6 CKD

  • AGMA 9005-F16 AS

  • JIS K 2219

  • US Steel 224

  • SEB 181226

• Official manufacturer approvals (OEMs):

  • Flender

  • CMD Gears

  • SEW-Eurodrive

  • ZF

  • Bonfiglioli

  • DB Santasalo

  • NORD Drivesystems

  • Zollern

Applications

• Enclosed industrial gears with straight, helical, bevel, and double helical teeth.

• Reducers and gearboxes in sectors such as mining, cement, steel, paper, power generation, and manufacturing.

• Bearings, rolling elements, gear couplings, and moving parts subjected to high or impact loads.

• Oil bath, splash, or forced circulation lubrication systems that require an ISO VG 150 mineral oil with EP additives.

Usage recommendation

• Consult the equipment or reducer manufacturer's manual to verify the required viscosity (ISO VG 150) and the CLP / CKD standard.

• Thoroughly clean the crankcase or circuit before filling to prevent contamination with other lubricants.

• Store containers tightly closed in a dry, cool place, protected from dust, contaminants, and direct sunlight.